Hourglass LED Wall Sconce
Description
Modeled after a wall sconce from the Dick Van Dyke show, this is a wall sconce that uses two LED tea lights with a remote. This is mostly decorative, the lights I use are not really bright enough to provide much beyond some ambiance. I realize I don't really have much in the pictures for scale, the total height after assembled is about 17 inches or so. The light is made to be mounted using command strips, but you could drill holes through it if you prefer. The three parts are connected with threads, so no glue required. I used these lights: https://www.amazon.com/gp/product/B07CLNHG1D/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1, but any light smaller than 3 inches should work. I used ezpass stickers (basically strong velcro) to stick them in so they can be removed to swap batteries or change lights. 8/24/18: There was a slight issue with the sconce connector piece that let you over screw the connection to the mount and could crack the side of it, so I fixed the issue and updated that part
Statistics
Likes
22
Downloads
0