Electric kick scooter conversion battery box
Description
This is a conversion of an old Yedoo Wzoom kick bike and an old hoverboard in to an escooter. Just sharing it if someone has an old bike and wants to convert it. The hover board battery needed a case and I made one. Not superhappy about the design but its functional and really fun. Good range with a 6 year old driving it. The acceleartion is way better than my Xiaomi m365 but the top speed is 19Km/h. It climbes all hills you throw at it with a small driver. Parts from the hoover board is motor, battery, charger and motor mount. Then a new controller was bought on ebay (36V ebike controller dirt cheap) and a throttle. The battery box is mounted in the screw holes from the back brakes. and strapped against the frame in the front. The motor is mounted with the removed mounts and a steel plate against an 40x40 Item rod. The item rod is screwed with an angle in the frame (original hole) to take the twisting loads from the side mounted motor. Then the rod is just strapped against the frame that supports the item rod. When assemble the battery needs some protective foam in the box to prevent it from shaking a part in there. The steel plate welded in front of the battery box needs to be slightly tilted forward. Ithougt it was screwed in to place but it was not. Holes for charger and fuse is removed and has to be fixed for your sized connectors. Printed in PetG, 4 perimeters, 60% infill, supports in the screw holes. Skrews: wood screw 2x 4x30-40, wood screw 8x 3x14 about and 2x M6. Happy riding and use a helmet.
Statistics
Likes
21
Downloads
0