Gloomhaven L1a Wood Room w/ OpenLOCK

Description

This is a set of printable wood floors for use in or out of gloomhaven. I give you several options to print and match this room. The entire room L1a with wooden floors can be printed out as one piece. You can print the paper copy and then paste it onto my openlock connectable hexes found here. https://www.thingiverse.com/thing:3020468. Note that even the places with knots in the wood are matched up to the picture. Every individual hex is matched to a printable hex. I have a key provided to see which tile you are printing. Other options include printing out each individual floor tile piece and connecting them using the openlock clip found here. https://www.thingiverse.com/thing:2343306 I also have produced each floor board with a 3mm base that can then be glued together to use less space for storage. It doesn't end there. I have also created two 1.5 inch hex miniature doors that can be printed. One normal and the other forced open. Place the long pivot bar through the frame and through the door. The door is then able to be opened and closed. In other words they are functional and when your playing group reaches the door you can open it to represent opening the door. Leave the door off and you have a hallway. Break up the door and you have a forced open door for an entrance that's been destroyed. If I get enough positive responses I will create some more door options and orientations and possibly more rooms and walls.

Statistics

Category

Tags