IKEA Dioder LED Strip Bracket
Description
I made these Brackets for the IKEA Dioder LED bars. These brackets are best used in a way that the LED bars illuminate the Printbed. the LED bars are positioned in such a way that they shine just over the printbed. This makes sure that the object that you are printing is nicely illuminated. I used rafts to increase adhesion, because the initial layer has somewhat small details, but you can leave them off if you have good bed adhesion. I used 15% infill with honeycomb you could use more or less, whatever you desire. Average print time per bracket is approx 28 mins depending on printspeed.
Statistics
Likes
13
Downloads
0