Stabilizing/Noise reducing feet for Wanhao I3 Plus/Maker Select Plus [Fixed]

Description

Edit 8/20/18: I accidentally uploaded an unfinished version of the feet so they were slightly offsize. I uploaded the Mk2 files which contains the finished version and tweaks the fit of the gantry tower feet a little. I designed some clip on feet for the Monoprice Maker Select Plus/Wanhao I3 Plus. These feet are to be used with 19mm/0.75" diameter or smaller hemispherical rubber feet like these (https://www.amazon.com/Sorbothane-Hemisphere-Non-Skid-Adhesive-Durometer/dp/B00AJ1IWBO) These are simple to print, clip on the front, rear, and sides of the gantry, and they work amazingly well. I was expecting the printer noise to be quieter but it was waaaay quieter than I was expecting. Also leveled out a very slight warp in my printer's frame, making its slight wobble virtually non-existent. You'll need to print 4 of the normal feet and two gantry feet. If you have a sturdy Z-brace, you don't even really need the feet on the gantry, but it makes it extra stable.

Statistics

Category

Tags