Tarot T-3DIV Gimbal Airplane Mount
Description
This is mount for fixing Tarot T-3DIV on fixed wing FPV platform. You need two pieces of 10X8X0.5-1.0 mm Carbon Tube. 2 of 4 nipples have smaller tip diameter (8mm), glue them with CA at one end of the mount as stopper. Other 2 with larger tip diameter (9mm) are to be glued to one end of each carbon tube. You dont need to glue or screw the tubes inside the mount, just put the gimbal in place, slide the carbon tunes from the open end of the mount and lock the gimbals ring around the tubes. I used metalic dark grey Filatech PLA Filament to print it. www.fila-tech.com Enjoy.
Statistics
Likes
4
Downloads
0