BLTouch Mount for FLSun QQ
Description
BLTouch Mount for FLSun QQ Delta printer. You will need 3 M3x10 screws to assemble and 2 screws from the BLTouch kit (or 2 M3x5) to mount. Run a M3 tap through the holes in the top plate and the two holes in the bottom piece. If you dont have a tap slowly work the M3 screws in and out of the parts to cut the threads. To mount to the effector unscrew the single M3 screw from the bottom under the logo side. Snap the mount on and use a M3x10 screw to secure. The tabs of the bltouch go on top of the mount and use two screws to fix the bltouch to the mount. I see that there is two different versions of the BLTouch this should work for both the classic and the smart.
Statistics
Likes
59
Downloads
0