Transamerica Pyramid
Description
I modified the base to cover the same outline as the rails. I also scaled it up to be 600mm tall. I also modified the connection between the top of the railing braces to the side of the building to make it stronger and easier to print. I used a 0.6 nozzle to print and used Simplify3D (S3D) to generate the Gcode. I used 3 print profiles in S3D. The bottom 2.1mm was printed solid with a layer height of 0.3mm. The rail section was printed hollow with 2 perimeter walls, inside out. From the top of the railing up I printed in spiral vase mode with a minimum layer time of 10 seconds. This will let your fans cool the print off and solidify so it doesn't come out as a melted blob on top.
Statistics
Likes
14
Downloads
0