Rektify Mk.2 - Hy-Con Conversion
Description
Is having a Nerf fully-automatic, magazine fed, brushed flywheel blaster not enough for you? Well, in this thing, you'll find the necessary components to convert a Rektify Mk.2 into a larger format flywheel system that'll punch through cardboard. The flywheel cage design is directly taken from the source files for the 'Hy-Con' system, which is best known for being the flywheel cage of the T19 - a brushless, fully-automatic Nerf blaster built to be as reliable as something capable of spitting out 185 FPS and 14 darts per second can be. It has been modified to be compatible with the mounting points on Rektify Mk.2, along with accommodations to maintain aesthetic uniformity and house the ESCs. Required will be two MultiStar V-Spec 2205-2350 kv motors, ESCs preferably compatible with SimonK, and a board to control it all. Performance will be variable depending on the wheels you decide to print (9.5mm to 11mm), and consistent performance will still be possible if you intentionally flash it to run under max velocity. Essentially, 185 FPS down (with X-tip waffles). V1.01 (8/21/18): Added reliefs in the 'Phase Filler' to not conflict with the motor mount screw heads.
Statistics
Likes
33
Downloads
0