Printrbot Simple Ubis 13HF Fan Shroud
Description
This is a fan shroud for a Printrbot Simple Metal (1403) using the Ubis 13HF. I could not find an other shrouds for this hot end so I decided to make my own. Beware: This version only has about 1mm clearance from the bottom of the nozzle or the print so if you are using a slightly different nozzle, it may not have enough clearance. The bottom front nut to secure the fan does not fit. It was fastened well enough without it so I just left it out.
Statistics
Likes
3
Downloads
0