magnetic arrow rest for wooden recurve bow
Description
This is a magnetic arrow rest for a wooden recurve bow. It is designed for bows with a wood width in the sight windows of about 17mm. On my bow the thread for the plunger button ends with a round 'washer' with a diameter of 16mm, for which I've made a cutout. But there's a version without the cutout too. additional material needed: - set collar with 2mm inner and 5mm outer diameter - a M3x6 hex socket cap screw - about 10cm of 2mm steel wire - a 5x5x1mm neodym magnet - a little washer (place under set collar)
Statistics
Likes
34
Downloads
0