Bi-Toob RC Plane Printed Parts + Build Description
Description
<b>WORK IN PROGRESS PLEASE READ</B> So I plan to add some additional details about building this biplane, however I have not had the time to put together any drawings or additional information. I have included all of the 3d printable files, you will need to print one of each file, and 4 of the optional hole supports. <b>Electronics used (for reference, this can surely use a wide range of electronics):</b> <i>Motor</i> - 2212 1400kv brushless w/ 10x4.7 prop <i>ESC</i> - 30A brushless <i>Battery</i> - 1250mAh 3s Lipo <i>Servos x4</i> - 9gmetal gear <b>The foamboard assemblies required are below:</b> <i>Fuselage</i> - 30" Long "noob tube" 3" outer dimension (find Experimental Airlines on youtube for more details about this) <i>Wings x2</i> - 30" Wingspan KFM2 7" Chord <i>Horizontal Stab and Elevator</i> - Rougly 14"x6.5" cut elevator hinge 2.5" from back <i>Vertical Stab and Rudder</i> - Roughly 6" tall 7" long cut rudder hing about 3.5" from back <b>Other items:</b> <i>Music wire and wheels for landing gear Bamboo skewers to secure power pod and for tail skid Control horns Music wire for push rods </i>
Statistics
Likes
55
Downloads
0