Gimx enclosure
Description
Its a new easy to print enclosure for your gimx adapter, its a really tight fit, but it fits everything perfectly, I have links for the parts I used below in order to fit everything remove all the pins from the cp2102 and use a piece of electrical tape between the modules for insulation, glue the 2 3d printed pieces with some super glue and its ready https://www.aliexpress.com/item/Pro-Micro-ATmega32U4-5V-16MHz-Replace-ATmega328-For-Arduino-Pro-Mini-With-2-Row-Pin-Header/32887074671.html?spm=2114.13010708.0.0.66704c4dleERV6 https://www.aliexpress.com/item/Free-shipping-New-6Pin-CP2102-Module-USB-2-0-To-TTL-On-STC-for-arduino-Pro/32335363035.html?spm=2114.search0104.3.8.1d4050da2W3NMh&ws_ab_test=searchweb0_0,searchweb201602_1_10152_5724111_10151_10065_10344_10068_10342_5724211_10343_10340_10341_5724311_10696_5724011_10084_10083_10618_10304_10307_10820_10821_10302_10059_100031_10103_5725011_10624_10623_10622_10621_10620_5724911,searchweb201603_2,ppcSwitch_5&algo_expid=0342e1b4-bf15-4084-9efa-8c2514192268-1&algo_pvid=0342e1b4-bf15-4084-9efa-8c2514192268&priceBeautifyAB=0
Statistics
Likes
7
Downloads
0