Acrobrat Dual Camera Bumper with Spacers
Description
* UPDATED, now allows adjustable mounting positions for upper and lower cameras. Also made the bumper fit a little tighter so it is less likely to be in view. You can run the HD camera on top or bottom. Running the HD on the top gives you less props in view and is my preference. It fits the runcam split mini, caddx turtle, and foxeer cameras (any 19mm width camera top or bottom). There was a nice dual camera mount here made by Deerslayer_1. I made a few changes to his design so it works better with my setup. Here are the changes: -Added the spacers into the mount design to accommodate 19mm cameras. -Reduced the size of the standoff screw holes so they fit a little tighter -Changed the position of the mounting holes (slots) so hd camera can be mounted on top or bottom. On top you'll have less props in view. - Bumper fits tighter against frame so it is less likely to be in camera view IMPORTANT: I suggest printing the sides one at a time to reduce stringing. You can use the single side and mirror the part and do 2 separate prints. Or you can use the mirrored stl and set your printer to print one part at a time (you may need to pause and remove between parts to allow for print head clearance) To do a 2 color print use ~19 inches of 1.75 tpu for the outside color.
Statistics
Likes
37
Downloads
0