Prusa i3 MK3 Biohazard Extruder Visualiser
Description
UPDATE 28/08/2018: I noticed a couple of peoples makes weren't centralised so Ive changed the diameter of the rod in the biohazard file to 7.48 mm with the same hole for a 4 mm x 2 mm magnet, I've also made the hole on the bottom side of it 7.48 mm and added a ring in the centre of the gas mask files to help align properly when gluing. Ive made a smaller biohazard part that should fit OK with the r3 extruder body and 45 deg. fan. This still looks good with the 100 scale gas mask but Ive made a smaller one if people wish to try it out. I came across 2 different designs and thought they would look pretty cool merged together so this is what I came up with. I've added a 6 mm x 6 mm x 4 mm rod to the back of the biohazard logo, with a 4.1 mm x 4.1 mm x 2.1 mm hole in the top to glue a magnet. I haven't tested this with the new updated r3 extruder body with 45 deg. fan, I'm not sure if it's too big and will hit the fan but I've included a 90% scale version but kept the same dimensions for the rod and hole for the magnet.
Statistics
Likes
188
Downloads
0