Skyhunter 1.8m Quick-swap camera mount
Description
Skyhunter Quick-swap camera mount ========================= Introduction -------------- This is a camera mount meant to go into the top canopy of the 1800mm/full-size Skyhunter. It retains good aerodynamics while providing lots of options for different camera setups. There is a mounting spot for a female MPX Plug (6 pins), meaning you can use it to power a tilt servo + the camera, or two cameras to use with a switcher :) The mount should fit the common large winch/360 degree servos as well if you want to mount a pan/tilt. Also fits a mobius quite snugly (you could attach it with some velcro). Also includes a simple insert on which you can mount the stock Runcam stand. Feel free to ask any questions! Installation Instructions --------------------------- Additional materials: - 4x M3 screws for attaching the camera mount/servo to the base - 2x M3 screws if you want to attach a Runcam mount to the base - A sharp knife/razor - CA glue for installation Notes: - The screw holes on the cam mount are a tad smaller so you could also use M2.5 screws. - I only glued the mount onto the upper part of the canopy so you can still remove it, but you'll need strong magnets or another kind of lock to hold the canopy on! Version History ----------------- * 29.8..2018 > Initial Release
Statistics
Likes
3
Downloads
0