Ender-3 ASSM (Angled Side Spool Mount)
Description
### Ender-3 ASSM (Angled Side Spool Mount) Just want to share my own angled side spool mount :) I've used before the "Ender-3 Side Spool Mount" which was working great but i've noticed that i need to lift up the z axis everytime i want to change the Spool because of the x-axis motor, which prevent to remove the Spool. As alternate, i've found the angled one but in my opinion i'ts with around 45° to strong angled in case of some reasons. So i decided to make my own version. It's only slightly angled, just enough to have enough space to the x-axis motor. You will be able to remove the spool everytime you want and you got a smooth filament feeding without high angles - besides that, it's maximum easy to print :) # Recommendation: I've combined it with following spool holder: https://www.thingiverse.com/thing:2988540 if you want to use 608zz bearings you can try this remix: https://www.thingiverse.com/thing:3059893 For me, all inconsistent and/or under extrusion problems are completely gone with that setup. # Versions: - Standard - should work with all available standard sized spools (HATCHBOX ROLL IS TO BIG) - Plus 10mm - just to be save its 10mm higher. I've used this ones on the Screens. RECOMMENDED! # Needed Parts: - The 2 included stock nuts - The 2 included stock screws - 2 more bolts of M5x10mm should do it then.
Statistics
Likes
155
Downloads
0