Modular Storage - Bigger Mini Drawers Ultimate - Reduced Printing Time
Description
Description ========= The bigger drawers were exactly what I was looking for but the housings printing time was way too long compared to the drawers. I have remixed the housing for the drawers to require less printing time. Basically, I have cut down on the joints as these provided a lot of complex movement which increased the printing time. They are now only 10mm long at each end. Additionally, I have removed the holes for the circles. For comparison these are the printing times between the original and the ones with reduced printing time. I have used the same settings for all tests: ### Housing 1x1 Original: 3h 28m Reduced: 2h 17m *34% reduction in printing time* ### Housing 1x2 Original: 4h 21m Reduced: 2h 34m *41% reduction in printing time* ### Housing 2x1 Original: 5h 01m Reduced: 2h 29m *51% reduction in printing time* ### Housing 2x2 Original: 5h 56m Reduced: 3h 36m *39% reduction in printing time* They work just as expected with all the drawers sizes and will interlock with the original models if you have any printed already. This is my first thing and a work in progress so I'd appreciate any feedback.
Statistics
Likes
29
Downloads
0