X-153 - "Sauce 1" - XL Monster Whoop - 3" Micro Brushless Quadcopter Drone
Description
**13.09.2018 - IMPORTANT UPGRADE TO CAMERA MOUNTS - ADDED CLEARANCE AND ADAPTERS** Note: This mount is internally cleared for 20 x 20 mm to ensure a clean fit for the camera. The mount can easily be bend to accommodate for any looseness and or you can use thin washer to resolve any issues if you encounter any. Picking the right file: There are several files here, they are as follows: 1. RunCam 19 x 19 Mount - Has a M2 hole on each side to mount 19 x 19 cameras or the provided adapters. 2. RunCam 19 x 19 Mount - Has M2 slots on each side to mount 19 x 19 cameras or the provided adapters. 3. Drop Head RunCam 19 x 19 Mount - Is labelled as such and is smaller than the other mounts. It is such that you should be able to now mount off the roof. 4. Universal Camera Adapter - By looping a rubber band around the front of the lens, twisting, pulling behind and over your camera and back onto the lens will secure your FPV camera. This is suitable for Tiny Whoop style cameras and offers adjustable tilt. The lens is cleared for 13.8 mm lenses. 5. Universal Camera Adapter TPU - This is the same as the above file with a smaller lens opening. If printed in TPU you can push fit in your camera. The mount should stretch and grip it. If you have difficultly carefully and safely cut a small slit to expand the hole. Print Advice: Place the piece on the bed so that when looking directly down it appears as a C or a U. You should have the print lines running along the long edge of the piece where the camera bolts in. For the adapter print vertically with the lock points point up off the bed. Files have been updated and included. Separate files can be found at: https://www.thingiverse.com/thing:3098162 real_darKing kindly made and shared an attractive mount to use on my frames. You can check it out at: https://www.thingiverse.com/thing:3094068 Preliminary Upload. Until full instructions follow instructions as the the X-120 or X-132 will get to 99% of the way. If you need camera mounts in set increments you can find them on the X-132/120. X - 132 - https://www.thingiverse.com/thing:2956351 X -120 - https://www.thingiverse.com/thing:3057883 **If you would like to use a Magnum Mini Stack (as in the Emax Babyhawk R) you will need to use the M2 to M3 adapters. You can mount via the arm holes or by rotating the stack to have one corner facing forward like a Tiny Whoop.** **Adapters: https://www.thingiverse.com/thing:3093369**
Statistics
Likes
8
Downloads
0