Motor Wire Savers 10mm x 15mm
Description
Need this or any other part but you don't have a printer. No problem visit my site and I will print you one or any other files you need to be printed. Visit: Http://pandemicfpv.com Visit my Youtube channel for giveaways and reviews. https://www.youtube.com/c/TheQuadcopterReview This mount can be printed in PLA or TPU. I printed mine in TPU. This is meant to be used on any quadcopter with 10mm wide arms to protect your motor wires from prop hits. Tips are always welcome! As a designer, it often takes several prints that go in the trash to refine the end product. Custom design requests also reviewed. If I can do it for you I will. Material: TPU Brand: Sain Smart Temp: 125c Bed Temp: 55c speed: 30 Retractions: Off Layer height: .08 to .1 for me you are safe in this range. You only sacrifice a small bit of quality. bottom/top thickness: 0.8 Fill Density: From 80 to 100 for a rigid finish 50 to 80 for a softer mount. I used 80 and 90 Support type: Touching Buildplate only.
Statistics
Likes
3
Downloads
0