Emlid NAVIO2 Autopilot Case II (Beta!)
Description
New NAVIO2 case. This is a new designed of the NAVIO2 plus Raspberry-Pi case that I designed some time ago. This case is in Beta stage. I have not tested it yet due to not having a 3D printer at hand at the moment. Please feel free to download it and test it. Feedback would be much appreciated since I dont really know the real fit of the case. Printing Instructions: Recomend using a layer height of maximum 0.2mm. Print both objects facing upwards. This means: Orient the Main Case body vertically with the holes for the USB and Ethernet connections of the RPi touching the bed. The Cap interior also needs to be facing up. Assembling Instructions: To put the case together you will need to have the RPi and the NAVIO already assembled with the screws. Then you will be able to slide it in the case with a little bit of patience and care. Let me know if it is too tight or small. The Cap can be put on the back part just by fitting it in. It is possible that the little arms of the lock-in mechanis will break. Let me know if this happens or not. Dont forget to share your prints!! Cheers!
Statistics
Likes
12
Downloads
0