Paramotor Strobe
Description
Strobe holder ment to mount on a near vertical tube. DS-30 White LED Strobe is from Amazon. A small switch, 9V battery and plug are also needed. Add a loop of tape on the none terminal end of the battery to help with removing it from the case. Use a ziptie to secure the battery. Rotate till the LED is flat to the horizon. Might add a drop of silicon or flexible glue between the 3D print and your frame to keep it from moving around. Printed at 20% infill don't make it too heavy Happy Flying!!! Strobe: https://amzn.to/2z1pANq
Statistics
Likes
6
Downloads
0