sisal scratching post stabilization

sisal scratching post stabilization

Description

I wanted to stabilize a scratching post a little bit (preventing it from wobbling). So I created those stabilization item that can be pushed over the post and fixed with screws to the (bottom/top) plate. The inner diameter is 108mm (for a post with 90mm diameter wrapped with sisal cord). Printing it with 1.6-2mm and infill with 20-40% should be strong enough in most cases. I attached it to a 50cm long post (one to the bottom and one to the top plate) and it works well for me.

Statistics

Likes

23

Downloads

0

Category

Pets