1:5 scale Glitch Buster for High Demand Servos
Description
The whole point of this project was to make a glitch buster for Hv dual steering servos with a throttle brake hv servo as well in use+ lights* off a lipo. I used the glitch buster cap with 10,000uf for Align helicopter actually I had laying around for a year when it failed all hell broke out and a brownout hit a 1:5 scale RC I had. So this is a bank of 1,000uf size 10mm od. You really only need 5,000uf for a 1/5 scale RC truck. But because the tires on Mt are so large if you hit mud and such and stress the dual hv servos over and over you get brownouts. So this was the solution! I created a bank of 1,000uf caps so if one or two fail you still are covered by the rest in play. I will post photos later of how I put everything together later! Enjoy! One other thing to mention! On the lid and at the wire side I have added 2 ridges on the lid.5mm high and 2 .5mm high ones as well on the holder it's self to crip a 32gag servo wire in place so it won't pull out! If the lid is backward it won't close flat !!!!
Statistics
Likes
1
Downloads
0