[RaspRail] - Wallmounted / Portable Raspberry Pi Rail Case (Model B both rev 1 and rev 2)

Description

This Raspberry Pi Case, Is Designed To Allow The Pi To Be Both Wall Mounted And Easily Be Portable In The Same Case. Further High Print-Ability Was Important. The Bottom-/Back- Side Of The Main Case Component Is Largely Hollow, To Reduce Warping. The Case Has Two Rails On The Back Side, Which Fit Into The Rail Negative On The Wall-Mount Plate. With The Wall Plate Mounted, The Raspberry Pi Case Can Slide In And Out Of The Wall Mounted Position, To Become A Portable Case. (In Case You Need To Access The Pi, And Do Not Want To Unscrew The Entire Case.) The Top And Bottom Parts Of The Case Join Together With 4 M3 Screws. There Are Two Versions Of The Case, One For Model B Rev 1 And One For Rev 2, The Version Is Indicated In The Filename. On The Top Cover, There Are Mounting Holes For A 50Mm Diameter Fan. (The Mounting Holes Are On The Corners Of A 40X40Mm Square). If You Enjoy My Work, I Would Appreciate A Small Bitcoin Donation To 1Msachsbbzjjbg83Nestv95Oluqmnmzngu. To Direct The Air Inlet Into A Specific Direction, You Can Use The Rasprail Airduct: Http://Www.Thingiverse.Com/Thing:399134 In Case You Don'T Want A Fan Just Yet, There Is A Cover Plate Available: Http://Www.Thingiverse.Com/Thing:396885

Statistics

Category

Tags