Capacitive / Inductive Mounting Plate For Modular X Carriage by Elzariant
Description
Being me, things never work right. I originally made [this adapter](https://www.thingiverse.com/thing:3082384) to use with [Elzariant's most excellent modular X-carriage](https://www.thingiverse.com/thing:2034743) for the Tevo Tarantula, but of course, I was unable to get it working correctly. I have been unable to find **anyone* willing or able to offer me any help at all, so... back to my trusty LJC18 capacitive sensor for the time being. This mount accommodates any of the LJ18 family of sensors and mounts in the same way as my BLTouch mounting plate - It is mounted to the system using the same mounting holes as the hot end mounting plate (on the right side). You'll need two 3x30mm screws to account for the increased thickness. Screw for mounting the sensor to the bracket are usually included with the sensor itself, but if not, a couple of 3x20mm screws and nuts should be fine. The sensor location is: X: +47.0mm; Y: + 7.0mm **NOTE** *Due to either a Thingiverse bug or (more likely) shadowbanning, my models no longer show up under the [**Newest**] listings. If you want to see more of my models, please be sure to 'follow' me.*
Statistics
Likes
5
Downloads
0