ws2812b LED wall and desktop clock (144LEDs/m 5LEDs/segment)
Description
https://youtu.be/3XVulZf1Hu4 https://youtu.be/5kFra08vxNg https://youtu.be/rfXyWw9daoY http://akizukidenshi.com/catalog/g/gP-11714 If used indoors, brightness is sufficient with 60 leds / m (2 leds / segment). To allow for reduced smoothness of the animation when switching the display, it is recommended to replace 60 leds / m LEDs with this model to reduce cost. The circuit board is Akizuki C. Please adjust the board size of 3D model to your liking. All thread sizes are M3. I cut a female thread with a tap. Please adjust the hole diameter before opening the female thread according to your preference. This model is reversed in direction with a desktop and a wall hanger. It is possible because the 3D model is point symmetric, but this is a design mistake. If you make it, you may modify the model so you do not have to rotate it. The rotation is detected with a tilt switch. You can also use a push switch. If you do not have to rotate automatically. You can use the uploaded Arduino source code. I will upload latest source code If you need.
Statistics
Likes
22
Downloads
0