FPVWRA Spec Wing V2 Aero Motor Mount
Description
Motor mount for VAS Spec Wing V2. This is the new version by VAS with already pre-cut front spars and shorter ailerons. This mount replaces foam motor block and allows CG to move forward. You will need to cut enough so that there is 0.75in or 19mm of foam thickness for this mount to mate perfectly. Then just use any adhesive such as Welders/Goop/E6000/Foamtac to glue it in place. Requires: - 32.5 x 32.5mm X-Mount (same as you would use with the stock foam and wood motor mount block) - M3 nyloc nuts (available at any hardware store for a few cents) - 6-8 mm M3 screws Use pliers to push in nyloc nuts and attach x-mount (w/motor) before gluing mount to foam. This will allow the nyloc nuts to stay in place while glue sets. Print in tougher material, PLA+, PETG, ABS. PLA will probably work as well. Happy flying!
Statistics
Likes
8
Downloads
0