Rivet heads and bolts for models
Description
This is a set bolts and rivet heads for adding detail to either a 3d printed model or scratch-built model. I have gouped them in 100s, but you can add more if your using Cura just keep importing files till you have as many as you want. you may need a small print nozzle or to print in resin for the smaller rivets and bolts, but the larger shoulud print fine with a 0.4mm nozzle. I printed with a raft and then removed with scalple or razor blade then used UHU superglue to attache to the model.(any super glue should work fine)
Statistics
Likes
65
Downloads
0