Cyclops dual color Y bowden splitter
Description
I recommend Slic3r Prusa Edition. And Firmware Klipper for 3D Printer. 4.1 мм throat for V6 E3D For Klipper part code - printer.cfg [extruder] step_pin: ar26 dir_pin: !ar28 enable_pin: !ar24 step_distance: 0.0052383446830801 nozzle_diameter: 0.4 filament_diameter: 1.750 heater_pin: ar10 sensor_type: ATC Semitec 104GT-2 sensor_pin: analog13 control: pid pid_Kp=28.661 pid_Ki=1.753 pid_Kd=117.151 min_temp: 10 max_temp: 260 min_extrude_temp: 160 max_extrude_only_accel: 6000 max_extrude_cross_section: 450 max_extrude_only_distance: 1650.0 #activate_gcode: M206 X0 #pressure_advance: 0.3 #pressure_advance_lookahead_time: 0.01 [extruder1] step_pin: ar36 dir_pin: !ar34 enable_pin: !ar30 step_distance: 0.0052383446830801 nozzle_diameter: 0.4 filament_diameter: 1.750 #activate_gcode: M206 X0 max_extrude_cross_section: 450 max_extrude_only_distance: 1650.0 shared_heater: extruder #pressure_advance: 0.3 #pressure_advance_lookahead_time: 0.01
Statistics
Likes
66
Downloads
0