modular battery holder
Description
Modular Battery Holders I searched Thingiverse but didn't find anything I really wanted. I got the joining method from tea988 https://www.thingiverse.com/thing:2354044, but I dont know if you'd really call it a remix. Maybe "inspired by..." AA, AAA, & 9V with slots for flat "coin type" batteries (CR2025 & CR2032). Make only what you need. Mix & match. Join them up however you feel. made with Tinkercad. I have made 25 of these for myself & family members. You may need to do some sanding to get a good fit. Not too tight or you won't be able to get them apart. These were tested using Duracell & Energizer batteries. Battery sizes do vary a little bit. More than I realized before starting these. no support no raft or brim .3mm layers 3 walls (1.2 mm with .4mm nozzle) 25% infill use denser infill near the top surface for a good top or use more top layers. ———————————————————————— I was asked about C batteries. Only 2 would fit in one of these blocks. I don't think that would be worth the trouble. So I made this. It's my gluestick holder slightly smaller. wall thickness is 2.0mm. 100% infill .3mm layers no support ———————————————————————— 1-30-2019 - 3 new variations to add-on https://www.thingiverse.com/thing:3393183 made by https://www.thingiverse.com/avendit/about including a BLANK so you can make your own ——— 7-15-2019 - a remix for the 18650 li-ion battery https://www.thingiverse.com/thing:3749138 made by https://www.thingiverse.com/Danikin/about ——— 7-31-2020 - i added 2 more one for CR2025 & CR2032 - 14 slots one for CR 2450 & CR1632 - 6 & 8 slots for WYZE motion & contact sensor batteries.
Statistics
Likes
296
Downloads
0