Print Bed First Layer Adhesion Calibration
Description
I wanted a first layer test that covered most of the printer bed, without having to copy and place each piece every time in my slicing software. I also wanted an internal feature, so I added holes. The squares are 10mm a side, and 0.4mm tall, with a 5mm hole in the center. The circular disks are 10mm in diameter, and 0.4mm tall, with a 5mm hole in the center. If your slicer can scale parts, you can adjust the Z to whatever you want, as 0.4mm may not match your layer height.
Statistics
Likes
18
Downloads
0