Acrobrat - Hatchback Mount
Description
This is the Hatchback mount I designed for my Acrobrat. https://rotorbuilds.com/build/14408 I've spent more money than I would like to admit on antennas. So keeping them as tight/protected as I can is a high priority. This seems to give a good balance of signal quality and protection. The Immortal T antenna mount is a "Clamshell" style mount. This makes replacing the antenna a breeze. I had some coarse 1.6MMx9MM Button head screws from some Runcam parts(I think?). Anything should work as long as it coarse enough to bite into the TPU. The XT60 mount is SUPER tight. I print with 100% infill and you practically have to press fit it in. This was on purpose and holds well without the need for any adhesives or glues. * Print with Support material. * Print with .2MM line height. Finally, check out my other Acrobrat parts! BEEPER MOUNT https://www.thingiverse.com/thing:3108401 CAP MOUNT https://www.thingiverse.com/thing:3108384 My Acrobrat Flight Footage: https://www.youtube.com/watch?v=UPUTQ5xspVc&t=1s Enjoy!
Statistics
Likes
28
Downloads
0