The Whoop Coop - 6mm
Description
The Whoop Coop, the perfect pocket protector for your 6mm tiny whoop builds! Fits cockroach frames and standard inductrix frames with any mullet mod capable tiny whoop canopy. Print Settings 1) Use 0.5mm line width for the best walls. This is fine even if you are using a 0.4mm nozzle, just change the "line width" or "extrusion width" setting in your slicer. 2) The lid snap fits onto the sleeve, so tight tolerances are required. If your extrusion is not calibrated precisely you may find that the lid doesn't fit. In this case scale the lid very slightly in your slicer, but not too much or the snap fit won't work. 0.2% increase would be where i'd start
Statistics
Likes
67
Downloads
0