DSQ-1 – KORG SQ-1 SEQUENCER EURORACK MOUNTING FRAME
Description
The DSQ-1 is a 3D printed eurorack mounting frame for the Korg SQ-1 sequencer. The frame can be also ordered at https://www.spillerphoto.com For the assembly of the mounting frame, the removal of the back of the original SQ-1 sequencer case is required. Easy assembly Remove the batteries Loosen the thin plastic film on one side which is holding the battery holder in place Unscrew the 4 front screws Remove the back and pull the battery holder through the back, that the back can be put aside Slide the mounting frame in Use the 4 screws from the front to fix the mounting frame
Statistics
Likes
36
Downloads
0