CR-10S mountable mother board case NOT FOR CR-10.
Description
basically i wanted to make separate cases for my control box internals, i found one by Robertbl22 which is mentioned though i onlyu used his idea, the remix is from the CR10 ALL IN ONE by Jan_P where they had a motherboard/ electronics plate for mounting under the printer on the extrusion but i have an enclosure and wanted to mount underneath like robert did his. i made the case lid from scratch really easily and added slots for zip ties or twist ties. i had printed roberts design and not read comments... my bad but anyways it didnt fit my REV 2.1 board so i decided i would remix these and make a REV 2.X compatible under table mounting system... it could be mounted everywhere though i guess given you have the proper length wires and such... currently printing right now but will upload pics of final products when done, will mostly likely be designing a mofset case to go with this and perhaps maybe a power outlet and power switch bracket as the one worked but i had to drill holes and have a gap between the switch and outlet. i have a hanging hinged backless screen and knob mount that is on my page as well with hook and latch to pin it back out of the way as mine will be hanging under my table i would like to be able to pin it up for cleaning and dog purposes haha
Statistics
Likes
11
Downloads
0