CNC Router Parts Sensor Covers
Description
This is my solution to a snagging/bumping issue on my CNC router; I have designed and printed some simple covers to help protect my end stop sensors. These covers were designed to fit over the Pepperl + Fuchs proximity sensors on the CNC Router Parts Pro series CNC machine kits. There are three different models, one for the X axis is universal and will work on either side of the machine, and the Y axis has a left side design and a mirror image for the right. The covers are attached to the sensor/bumper plates with four each M4-0.7 x 12mm hex drive cap screws and M4 flat washers. The plate was drilled and tapped after using a transfer punch and the part to locate the holes.
Statistics
Likes
8
Downloads
0