Creality Ender3/CR-10 X axis double damper mount for heat sink and fan
Description
After having issues with single dampers and heat issues when using them I came up with a dual mount that allows the addition of a heat sink and even a fan if needed. Adding the heat sink alone has the stepper running around the same temperature as when not using the dampers, with the fan added it is completely cool to the touch. There are 2 files, one for the CR-10 printers which uses the longer stepper motor, and one for the Ender 3 which is the shorter one. I'm working on a setup for the Y axis and will include in this set when completed. Link to the heatsink I used. I trimmed the fins and drilled holes. Do not use the pads included BNTECHGO 4 Pcs 40mm x 40mm x 11mm. https://www.amazon.com/dp/B01IQOAJBQ/ref=cm_sw_r_cp_apa_SfHRBb5X2WAYD
Statistics
Likes
21
Downloads
0