Tandem Tslim x2 Case and clip
Description
Update: I added a newer version of the case with a wider slot for the charging port. I added another version of the clip. I've had very good luck printing the clips with PETG. This is a case for a Tandem T:slim x2 insulin pump. I broke mine so I set out to design a new one (I didn't want to wait the 2 weeks to get one shipped.) Luckily it's only taken me 3 weeks to design and print this :-) The case is designed to be printed with flexible filament otherwise you won't be able to get the pump in the case. The clip should be printed with any rigid filament of your choice. I've used PLA on the clip and it has held up very well at 20 percent infill. The clip is meant to be threaded through the slots in the case. There are two clips. Clip2 is designed to have more grabbing power on your Jeans/pants etc so it doesn't pull out as easily, but it can be harder to pull off intentionally. UPDATE: added Tamdem_Tslim_x2_Case_thicc.stl for a thicker case. I suggest printing it with supports and I like the Fast Honeycomb at 13% infill. Good grief, it's almost 4 years since I created this and uploaded it, and have put quite a bit of time into this model and I just now realized I misspelled Tandem on the parts. Oh well.
Statistics
Likes
42
Downloads
0