Lens for SMD Power LED (torch distributor/diffuser) snap-fit
Description
Lens for SMD Power LED (torch distributor) It's more of a diffuser then a lens since it's hard to print a lens, you can print it in transparent or some semi transparent color if you wan't to change the color of the light. I think best result would be if you print it with 0% infill and maybe 1 or 2 outline/perimeter shells and as few top/bottom layers as your printer can handle. . <h4>Edit #1: After test printing i decided to change a few minor things and tolerance with the sketch and also made some walls thicker to be possible to print with bigger nozzle, updated to V2. </h4> The lens and frame are made to fit for the SMD Power LED model shown in this picture: <img src="https://cdn.thingiverse.com/renders/5e/9b/31/dd/d0/5f76448058d9651e69d37ca6eab7b3d8_preview_featured.jpg" alt="SMD Power LED Module" title="SMD Power LED " />
Statistics
Likes
7
Downloads
0