Foam glider twin motor mount
Description
This is a twin motor mount for making a Walmart foam glider into a remote control plane. Motors used are Quanum BE1806 2700 KV from HobbyKing. Use 3M double sided tape on the inside of the saddle motor mount that goes over the fuselage. Also recommend applying 2 inch wide fiber packing tape on the foam fuselage before sticking the mount onto the fuselage, so the mount can be removed later without destroying the foam. Then apply one large rubber band on the underside of the fuselage for added security. Edit: Added a different version of the 1806 as well as added a smaller mount to accommodate the E-MAXX 1106 size motors. These 2 mounts you may have to scale by a factor of 2.54 or 25.4 or 10 depending no your slicer.
Statistics
Likes
28
Downloads
0