Connector mashup: Mil-spec M38999 and Molex 0/062 contacts
Description
Connector mashup: Mil-spec M38999 and Molex 0/062 contacts Inspired by the mil-spec 38999 series of connectors, this is a mashup of a shell size 15 M38999 connector plug and receptacle with the molex 0.062 contacts used in https://www.thingiverse.com/thing:2755931. If you want to print them, print the test block first and fit pin connectors into the holes. Pick the hole size that the pin goes into but is not loose enough for the end of the pin to wiggle significantly. If the pins are loose, they do not go into the socket contacts, and can get pushed back and damaged. The knurled conenctor ring is held on by the split washer, which the ring screws onto. I have included a cable clamp with this. Not showing the OpenSCAD at this time (too messy, under work). Contact P/N: These are designed to use the following contacts: female contact Molex P/N 02-06-1103 (in the bulkhead receptacle) male contact Molex P/N 02-06-2103 (in the plug (cable) )
Statistics
Likes
253
Downloads
0