Low-Poly Rhino Bust For Wall (Large)

Description

I've designed this Rhino Bust so it can print with or without eyes (so the eyes could be printed separately in a different color). I've also done it with and without built in supports. This means there are four models to give you all combinations of the options: • Rhino Bust (with eyes, no supports) • Rhino Bust (with eyes and supports) • Rhino Bust (no eyes or supports) • Rhino Bust (no eyes, with supports) If you print the eyes separate from the bust... one has an L on it (against the print bed) to indicate that is the left eye. The eyes slide easily into the bust. This can be hung firmly to the wall using <a href="https://www.thingiverse.com/thing:3865583">Thing 3865583 - Bracket for Wall Mountings</a> . The bracket has room for two screws, but I've found that using the top screw hole only is sufficient. I've also added a small slot, so the Rhino Bust can also be hung with just a nail if you prefer. For similar models see my <a href="https://www.thingiverse.com/UWcharlie1983/collections/animal-busts-other-wall-mountings">Collection of Animal Heads/Busts</a> that I have designed or remixed. All of these designs use the same bracket to mount to the wall. ***If you print one, please consider posting a make!***

Statistics

Category

Tags