PSU Cover Meanwell LRS100 5V
Description
I was in need of a 5V power supply for some LED projects and bought a Meanwell LRS100 5V with enough power to fulfill my needs :) As I was not satisfied with the PSU covers I found I desgined my own. It has an on/off switch and a mains plug. And you can open it for rewiring purposes without taking the whole damn thing apart. Nothing fancy. Print time for both parts approx. 3h (at 40mm/s speed). If there are any wishes for additional information feel free to comment :) You will need: - Some M3x5 screws (e.g. ISO 7380-1 or whatever you have on hand, they should be 5mm long, or there will be some clearance issues) : something like this: http://t1p.de/6813´ - Press-in nuts: M3x4 or M3x5; e.g. http://t1p.de/m4qn . However I would suppose buying them from aliexpress, a lot cheaper and quality is ok too - Main plug ( or however you call those things): e.g. http://t1p.de/wvas - On/Off Switch (its a "snap" fit, try to use the same): Marquardt 1801 series: http://t1p.de/wtzz - Blade Connectors
Statistics
Likes
11
Downloads
0