Firefly Hawkeye Iflight iX3 mount with top plate and xt30 holder
Description
This is a Hawkeye firefly mount for the Iflight ix3 frame. I did this to avoid ziptight the original mount. It should be less vibration by the way. Angle is 30°. The mount is not visible in the video recorded by the cam. The top plate is not for replacing the original one, you must put it on the original top plate. It also soft mount the battery as I printed it inTPU. There are two version : firefly.stl : cutted for my original need (one zip on top plate and antennas at the back fixed to the top plate. firefly_full.stl : without the cuts There is the 123dx file in case you want to make your own ajustements. Model is "clean" -> click on Thingview.
Statistics
Likes
4
Downloads
0