Bullseye LED Light Bar - 24V Stripe v1.2
Description
#BULLSEYE LED LIGHT BAR - 24V STRIPE This is a little simple lightbar for the original "Bullseye Hotend Cooler". - v1 is a thin illumated one (first picture) printable in PLA but prefered to print in PETG/ABS! - v2 is a stronger version printable in PLA and prefered to print in PETG/ABS useable inside an enclosure! Its made for a 24V-LED-Stripe (L-50mm x W-20mm x T-8mm), so you can plug it directly into the 24V PSU of a Ender 3, but you can use every LED-stripe you prefer. This one should fit: https://de.aliexpress.com/item/Double-row-SMD-5050-10-meters-120led-m-IP67-120-LED-strip-24V-10m-waterproof-Led/32702401771.html For holding the light bar in place you can use either cable ties or double sided duct tape. But best solution is to drill 2 little holes into the bullseye and use small wood screws. =============================== Update v1.1 Included a web into the led-profil to give it more stability. Mostly for PLA cause it has the characteristic, especially when it gets warm, to slowly deform. If your printer is well calibrated, bridging should work for the web, if not please use a support! Changed dimension slightly for the end-cap to fit better! =============================== Update v1.2 Added a stronger version for the "Led Profile" useable inside a printer enclosure and printable in PLA but prefered to print in PETG/ABS =============================== Have fun printing! =
Statistics
Likes
93
Downloads
0