Micro (19mm) to Full Size (29mm) FPV Camera Adapter With Nuts, Low Profile
Description
I needed a shallow mount adapter to fit my runcam micro eagle on my tyro99 build, since the aluminum frame is so small that the camera normally would stick out and not be protected. I moved the camera mounting holes back so the camera back is about flush with the back of the mount. I also removed the beveled side of the six mounting holes to make them stronger since there are backing nuts. Last, I widened the adapter to be just under 29mm so it takes up the entire width of the cage in the Tyro99 I The thing you have to watch out for when using this is clearance behind the camera. On the Tyro99, a Runcam micro eagle 2 connector gets wedged into the stack once the camera angle gets high around 45 degrees.
Statistics
Likes
42
Downloads
0