Lasersaur Lens FocusAid
Description
### General This is a tool for adjusting the laser in a Lasersaur when using a second (red) laserpointer for adjustments. It is used to make sure that the laser passes the focussing lens through its center. ### Usage The tool is placed on the lens tube, such that the plateau in the center is oriented down, towards the lens. Ideally, the plateau is located just slightly above the lens surface, so that its approximately at the same height. The mirrors can then be adjusted to guide the laser beam through the center of the lens. ### Dimensions Two versions of the Focus aid are available, a 6.5mm and a 8.5mm version.The bottom of the plateau is located 6.5/8.5mm unter the rim of the lens tube. The inner dimension of the large ring is 30.75mm
Statistics
Likes
1
Downloads
0