Magnetic Effector for Lasers
Description
It Is A Effector Design Primarily For Kossel800 By Maximscy, But Should Also Work For Any Machine That Uses Effectors That Match The Dimensions Of This One. (See Picture 2 To Check Out) Technically This Design Could Turn You 3Dp In To A Laser-Engraver (A Weak One Tho). It Should Work With Any Laser Module Of Diameter Of 12Mm. They May Look Like The One In The Third Picture. This Kind Of Lasers May Engrave (But Of Course Not Cut) Plywood As Long As You Get Some High-Watt Ones And Adjust Them Properly. Since You Want To Engrave And Cut Paper You Should Get Ones That Emit Laser Spots Instead Of Emit Laser Line Or Laser Cross. You Should Get More Than One At A Time Because They Get Burnt Easily If They Keep Working For Too Long. It Has A Spot For A 40Mm Fan As Well. Please Note That The Face Shown In The First Picture (Openscad One) Is Supposed To Be Facing The Down Side To The Work Plate When Assembled. Also, You Definitely Want Goggles On When Working With Lasers (Even When They Are As Weak As 100Mw). And Although I Am 95% Sure About This Design, I Have To Say It'S Not Tested Yet (My Kossel 800 Will Be On The Way In 2 Weeks, Hopefully). Thank You And Enjoy. --- Picture Source: Baidu.Com --- Update: V1.1, With Corrected Angle, Has Been Updated. --- Update: I Got One Of Those Lasers And It Works Great With Dark Surfaces. Mine Is 250Ma. Hopefully It Won'T Get Burnt Too Soon.
Statistics
Likes
14
Downloads
0