Modular Light Modifier System for Strobist (v1) [MLMS]

Description

This is a modular system for the lighting modifier (V.1). Using magnets to make a quick and safe change of modifier. This use of neodymium magnet of 4x2 mm, very cheap and easy to find in electronics stores. Clean the hole a little and stick it. Be careful with the directions, you must have all the magnets in the same direction. The multi-flash adapter needs a Velcro strip and sew it. The BASE file, it's just the base square with the holes in the magnets, you can make your own flash adapter (like the SB700 adapter that I make), soon I'll make more adapter for Ynguo. The filter holder is for 44mm wide gels it is difficult to print in one piece, so I make a two piece version that I need to join later. This model have two sides for the Magnets, so you can use it BETWEN other modificiers, The Snoot is very thin, I need to redo it, but it can be used. Maybe you can reinforce it with black tape or varnish. Make your own adapter or modifiers and share them with the [MLMS] tag to make it easy to find them

Statistics

Category

Tags